IRIS Instruments
HomeLogin

Tipix 2200

Tipix 2200
Tipix 2200

The TIPIX 2200 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers.

This entry-level instrument has been designed for an ease of use and for a good productivity together with a strong protection against misuse. This very robust device has proven to be reliable even in very cold weather (up to -40°C) or in wet environment. It is able to inject up to 2200W in the soil and to inject up to 13A, so that it is suitable, even on conductive soils, to measure resistivity and IP at medium range depths. It is powered by standard generator.

With the possibility to limit current, power, voltage, and the different self-test and quality control of the injected signal, the TIPIX ensure a good protection for the device and he operator. This instruments features 4 buttons on the front face that allow the operator to select manually different voltage injection levels. The “automatic range” mode allow to select automatically the optimal injection level regarding the contact resistance.

NEW:
The MASTER-SLAVE mode allows to connect two TIPIX in series, whatever their power. This type of connection adds the maximum voltage and power of the two systems to increase the amount of current injected on medium to high contact resistance values.

Tipix 2200

Using two TIPIX 2200 connected in series increases maximum power to 4400W and maximum voltage to 3600V (or 7200Vpp).
Using oneTIPIX 2200 and one TIPIX 3000 connected in series increases maximum power to 5200W and maximum voltage to 4300V (or 8600Vpp).
The use of the MASTER-SLAVE mode is very easy as it is automatically recognized and the combined system maximum voltage and power is automatically updated. The two TIPIX can be powered by a single motor generator making the complete system light and portable.

To increase your productivity, several TIPIX can be synchronized together via external GPS. The Toff time used for IP measurements is therefore synchronized, so that one can perform several IP measurements on nearby places without interfering from one measurement on the other.
This option can be used also to increase the signal/noise ratio by injecting with several synchronized TIPIX.

Software

Download
pdf

Prosys II

Resistivity data management

Characteristics

Transmitter

Pulse duration: 

500ms,1s, 2s, 4s, or 8s

Output Power:

0 - 2200 W
0 - 4400 W MASTER-SLAVE

Output Voltage:

0 – 3600 Vpp
0 - 7200 Vpp MASTER-SLAVE

Output Current:

0-13000mA

1 mA / 1%

Resolution / Accuracy: 

Synchronisation:

Auto on GPS PPS

Readings: 

Displays output current, output voltage, contact resistance and input power.

Protection:

Short circuits, thermal protection, Input overvoltage and under-voltage.

Power requirements:

Single phase motor generator 115 or 230 VAC / 50 or 60 Hz.

Dimensions

( L x W x H)

41x24x32cm

weight: 

24Kg

Operating Temp.: 

-40 to +60°C

Documentation

pdf
Datasheet
pdf
Checklist
Accessories
pdf
Principles of geophysical methods for groundwater investigations
pdf

IRIS Instruments
1 Av. Buffon 45100 Orléans France
Copyright © 1991-2016 IRIS Instruments. All Rights reserved.